> Tool

Tool There are 55 products.

per page
Showing 21 - 40 of 55 items

  • Specification :9/16” hex for dust cap on access valves and plug oil check on compressor. 1/2” hex for compressor mounting bolts. 1/4” square for valve stem and service valves and old style compressor valves. 3/16” square for valve refrigerant charging tanks.

  • The 36 facilitates the mounting of different bearings with bore diameters from 10-55mm

  • Roughness Comparator Specification: Grit Type Section profiles Metric 25μm, 60μm, 100μm, 150μm Section profiles Imperial 1mils, 2.4mils, 4mils, 6mils

  • 1000 Lumen Headlamp operate with 18650 rechargeable battery and single-channel charger. Features Advanced Temperature Regulation (ATR) technology to keep the light from ever overheating Super compact and lightweight full-metal construction provides flexibility in use, while the nylon headband fits snugly yet comfotably in place. 

  • Roughness Comparator Specification: Shot Type Section profiles Metric 25μm, 40μm, 70μm, 100μm Section profiles Imperial 1mils, 1.6mils, 2.8mils, 4mils

  • The 5X Illuminated Magnifier is used for viewing the Roughness Comparator.  

  • Crimping type/profile   Hexagonal crimping Hex Crimp Tool Crimp according to Euro-Norm EN 60947-1 Type of contact Wire-end ferrules with/without plastic collars

  • Bridge Cam Type Welding Gauge Gage C50 MG-8 Test Ulnar For Welder Inspection Imperial & Metric System It can be used to quickly and correctly measure the sizes of most common welds in the English system and the metric system.  Application: Angle of preparation Excess weld metal Depth of undercut Depth of...

  • Stainless Steel Taper Gage 1-15mm. Taper Welding Gauge Test Ulnar Inch & Metric System. Made of stainless steel, miniature lightweight, pocket size with permanently engraved graduations. Accurate taper throughout the length of the gauge makes it a convenient tool for measuring diameters of small holes and slots etc.

  • Stainless Steel Taper Gage 1-30mm. Taper Welding Gauge Test Ulnar Metric & Inch System. Made of stainless steel, miniature lightweight, pocket size with permanently engraved graduations. Accurate taper throughout the length of the gauge makes it a convenient tool for measuring diameters of small holes and slots et cetera.

  • Sledge Hammer Ring End Spanner Short profiled handle with a heavy-duty striking end. For heavy industrial applications and ideal for work in areas such as shipyards and the rail industry.  Ring endedHardened and tempered for long lasting and rust resistant Steel construction Grey finish

  • Telescoping round mirror has multiple uses and angle adjustments Mirror diameter: 2" Strong and sturdy handle holds mirror stable at any angle Convenient pocket clip on body Length: extended 600mm

  • Cat #: HKL1232 UPC #: 783310235217 Two-speed ram advances fast and shifts to a lower speed to complete the crimp. Strong lightweight fiberglass handles. Push button permits dies to be inserted and removed easily. C style head4" opening for easy placement on connectorsAccepts Greenlee KC12, KA12, as well as industry U style, dies. Comes in a...

  • Greenlee KD12CU Specifications:• Cable Type: Copper• Cable Range: 6 to 750 MCM• Capacity: 6 to 750 MCM• Crimping Capacity: 6 to 750 MCM

  • 9 pieces 1/2 inch square drive insulated socket set, Metrinch sockets are designed to drive on the flats, not the corners, this enables them to suit metric/imperial. Standard: IEC 900 (DIN EN 60900) Insulation material tested up to a minimum of 10000 V Sockets and Tools are guaranteed up to 1000V They are manufactured from high-grade chrome...

  • VDE/1000V Electrician Tool Kit VDE & DIN certified to 1000 VAC 11 pc Tool Set Special alloy steel, Drop forged hardened Exceptional strength & durability

  • Hand crimp tools for series tubular terminals size 8 to 80mm2

  • Hand Reamer 1/50 Taper Pin Straight Flute

Showing 21 - 40 of 55 items